ROUTER RIP
1. Mengisi IP pada komputer
Jupiter
Network 192.168.24.1
Gateway 192.168.24.100
2.
Konfigurasi Pada Switch
Jupiter
Switch>en
Switch#conf t
Enter configuration commands, one per
line. End with CNTL/Z.
jupiter(config)#hostname SJupiter
SJupiter(config)#
%LINK-5-CHANGED: Interface FastEthernet0/2,
changed state to up
3.
Konfigurasi pada Router
Jupiter
Router>en
Router#conf t
Enter configuration commands, one per
line. End with CNTL/Z.
Router(config)#hostname RJupiter
RJupiter(config)#int fas0/0
RJupiter(config-if)#ip add
RJupiter(config-if)#ip address
192.168.24.100 255.255.255.0
%LINK-5-CHANGED: Interface FastEthernet0/0,
changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on
Interface FastEthernet0/0, changed state to up
RJupiter(config)#int se2/0
RJupiter(config-if)#ip add
RJupiter(config-if)#ip address 172.16.24.10
255.255.0.0
RJupiter(config-if)#clock rate 128000
RJupiter(config-if)#no sh
%LINK-5-CHANGED: Interface Serial2/0,
changed state to down
RJupiter(config-if)#no sh
RJupiter(config-if)#no shutdown
RJupiter(config-if)#exit
RJupiter(config)#
%LINK-5-CHANGED: Interface Serial2/0,
changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial2/0, changed state to up
RJupiter(config)#int se3/0
RJupiter(config-if)#ip add
RJupiter(config-if)#ip address 172.1.24.20
255.255.0.0
RJupiter(config-if)#clock rate 128000
RJupiter(config-if)#no sh
%LINK-5-CHANGED: Interface Serial3/0,
changed state to down
RJupiter(config-if)#exit
RJupiter(config)#router rip
RJupiter(config-router)#net
RJupiter(config-router)#network
192.168.24.0
RJupiter(config-router)#net
RJupiter(config-router)#network 172.16.0.0
RJupiter(config-router)#net
RJupiter(config-router)#network 172.1.0.0
RJupiter(config-router)#net
RJupiter(config-router)#network 172.6.0.0
RJupiter(config-router)#net
RJupiter(config-router)#network 10.0.0.0
RJupiter(config-router)#end
RJupiter>show ip protocol
Routing Protocol is "rip"
Sending updates every 30 seconds, next due
in 17 seconds
Invalid after 180 seconds, hold down 180,
flushed after 240
Outgoing update filter list for all
interfaces is not set
Incoming update filter list for all
interfaces is not set
Redistributing: rip
Default version control: send version 1,
receive any version
Interface Send Recv
Triggered RIP Key-chain
FastEthernet0/0 1 2 1
Serial2/0 1 2 1
Serial3/0 1 2 1
Automatic network summarization is in
effect
Maximum path: 4
Routing for Networks:
10.0.0.0
172.1.0.0
172.6.0.0
172.16.0.0
192.168.24.0
Passive Interface(s):
Routing Information Sources:
Gateway Distance Last Update
4.
Konfigurasi IP Pada Komputer Leo
Network 10.10.24.1
Gateway 10.10.24.100
5.
Konfigurasi Pada Switch Leo
Switch>en
Switch#conf t
Enter configuration commands, one per
line. End with CNTL/Z.
Switch(config)#hostname SLeo
SLeo(config)#
%LINK-5-CHANGED: Interface FastEthernet0/1,
changed state to up
6.
Konfigurasi Pada Router Leo
Router>en
Router#conf t
Enter configuration commands, one per
line. End with CNTL/Z.
Router(config)#hostname RLeo
RLeo(config)#int fa0/0
RLeo(config-if)#ip add
RLeo(config-if)#ip add
RLeo(config-if)#ip address 10.10.24.100
255.0.0.0
RLeo(config-if)#no sh
RLeo(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0,
changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on
Interface FastEthernet0/0, changed state to up
RLeo(config-if)#exit
RLeo(config)#int se2/0
RLeo(config-if)#ip add
RLeo(config-if)#ip address 172.16.24.20
255.255.255.0
RLeo(config-if)#ip address 172.16.24.20
255.255.0.0
RLeo(config-if)#clock rate 128000
RLeo(config-if)#no shu
%LINK-5-CHANGED: Interface Serial2/0,
changed state to up
RLeo(config-if)#exit
RLeo(config)#
%LINEPROTO-5-UPDOWN: Line protocol on
Interface Serial2/0, changed state to up
RLeo(config)#int se3/0
RLeo(config-if)#ip add
RLeo(config-if)#ip address 172.6.24.20
255.255.0.0
RLeo(config-if)#clock rate 128000
RLeo(config-if)#no sh
%LINK-5-CHANGED: Interface Serial3/0,
changed state to down
RLeo(config-if)#exit
RLeo(config)#router rip
RLeo(config-router)#net
RLeo(config-router)#network 192.168.24.0
RLeo(config-router)#net
RLeo(config-router)#network 172.16.0.0
RLeo(config-router)#net
RLeo(config-router)#network 172.1.0.0
RLeo(config-router)#net
RLeo(config-router)#network 172.6.0.0
RLeo(config-router)#net
RLeo(config-router)#network 10.0.0.0
RLeo(config-router)#end
RLeo>show ip protocol
Routing Protocol is "rip"
Sending updates every 30 seconds, next due
in 3 seconds
Invalid after 180 seconds, hold down 180,
flushed after 240
Outgoing update filter list for all
interfaces is not set
Incoming update filter list for all
interfaces is not set
Redistributing: rip
Default version control: send version 1,
receive any version
Interface Send Recv
Triggered RIP Key-chain
Serial2/0 1 2 1
FastEthernet0/0 1 2 1
Serial3/0 1 2 1
Automatic network summarization is in
effect
Maximum path: 4
Routing for Networks:
10.0.0.0
172.1.0.0
172.6.0.0
172.16.0.0
192.168.24.0
Passive Interface(s):
Routing Information Sources:
Gateway Distance Last Update
7.
Konfigurasi pada Router
Ratna
Router>en
Router#conf t
Enter configuration commands, one per
line. End with CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip address 172.1.24.10
255.255.0.0
Router(config-if)#clock rate 128000
Router(config-if)#exit
Router(config)#int se3/0
Router(config-if)#ip address 172.6.24.10
255.255.0.0
Router(config-if)#clock rate 128000
Router(config-if)#exit
Router(config)#router rip
Router(config-router)#net
Router(config-router)#network 192.168.24.0
Router(config-router)#net
Router(config-router)#network 172.16.0.0
Router(config-router)#net
Router(config-router)#network 172.1.0.0
Router(config-router)#net
Router(config-router)#network 172.6.0.0
Router(config-router)#net
Router(config-router)#network 10.0.0.0
Router(config-router)#end
Router>show ip protocol
Routing Protocol is "rip"
Sending updates every 30 seconds, next due
in 9 seconds
Invalid after 180 seconds, hold down 180,
flushed after 240
Outgoing update filter list for all
interfaces is not set
Incoming update filter list for all
interfaces is not set
Redistributing: rip
Default version control: send version 1,
receive any version
Interface Send Recv
Triggered RIP Key-chain
Serial2/0 1 2 1
Serial3/0 1
2 1
Automatic network summarization is in
effect
Maximum path: 4
Routing for Networks:
10.0.0.0
172.1.0.0
172.6.0.0
172.16.0.0
192.168.24.0
Passive Interface(s):
Routing Information Sources:
Gateway Distance Last Update
172.6.24.20 120 00:00:13
Selesai Selemat Mencoba J J
Tidak ada komentar:
Posting Komentar